Description

The Flomarvel FH-MO/S series 2-way electric ball valve is made of stainless steel 304 316, offering excellent corrosion resistance and suitable for use in a variety of environments. With signal feedback when the valve is fully open/closed.The external controller receives the open/closed position signal,it cuts off power,the valve stay in open/close position.

As a manufacturer, to ensure reliability in demanding applications, our valves has enhanced sealing performance, precise full open / full close positioning, durable metal gear transmission, and 100% functional test before shipment (30-minute operation test).

With extensive experience in OEM and ODM projects, we have the expertise to customize our products to meet your specific needs and requirements.

Specifications

Working Voltage: DC5V, DC12V, DC24V,

Operating Time: <5secs

Working Current: <100mA

Max Power: 5W

Working Pressure: 0-1.0MPa

Valve Material: Brass,Stainless Steel,UPVC

Manual Override: Optional

NPT BSP Thread for option

Sear Material: PTFE

Coil Connection: 35cm(13”) by default and it’s customizable

Enclosure: IP67

Average temperature: 0°C to 100°C

Ambient temperature: -15°C to 45°C

Fast Switching zero leakage metal gear (80,000+ cycles) 100% tested

Applications

Water purification system

Water treatment system

Water saving system

Medical equipment

Building Automation

Smart agriculture automatic irrigation system,

Smart home system

Small equipment for automatic control

Recreational vehicle (RV), sprinkler truck, HVAC system

OP05 Five-Wires With Signal Feedback

1. SW is switched to open, OLS is turned on after the valve is fully open, green wire outputs signal.Once the external controller receives the open position signal, it cuts off power, the valve stay in open position.
2. SW is switched to closed, CLS is turned on after the valve is fully closed, yellow wire outputs signal.Once the external controller receives the close position signal, it cuts off power, the valve stay in closed position.

FAQ

• What are the differences between OP01F wiring and OP05 wiring?

         For OP01F wiring, the actuator will cut off automatically and the valve stops moving after the valve is fully open/closed.

         For OP05 wiring, the external control is needed to stop the valve moving after the valve is fully open/closed.

• What is the IP (Ingress Protection) rating of this valve?

         IP67. For permanent outdoor installation, they should be installed under a cover or within a protective enclosure to avoid prolonged exposure to rain.

• Is this valve certified for potable water?

         Yes. Flomarvel stainless steel ball valves are certified to NSF 61 and are approved for safe use with potable (drinking) water.