Description
The Flomarvel FH-MO/S series 2-way electric ball valve is made of brass, offering excellent corrosion resistance and suitable for use in a variety of environments. With signal feedback when the valve is fully open/closed.The external controller receives the open/closed position signal,it cuts off power,the valve stay in open/close position.
As a manufacturer, to ensure reliability in demanding applications, our valves has enhanced sealing performance, precise full open / full close positioning, durable metal gear transmission, and 100% functional test before shipment (30-minute operation test).
With extensive experience in OEM and ODM projects, we have the expertise to customize our products to meet your specific needs and requirements.
Specifications
Working Voltage: DC5V, DC12V, DC24V
Operating Time: <5secs
Working Current: <100mA
Max Power: 5W
Working Pressure: 0-1.0MPa
Valve Material: Brass,Stainless Steel,UPVC
Manual Override: Optional
NPT BSP Thread for option
Sear Material: PTFE
Coil Connection: 35cm(13”) by default and it’s customizable
Enclosure: IP67
Average temperature: 0°C to 100°C
Ambient temperature: -15°C to 45°C
Fast Switching zero leakage metal gear (80,000+ cycles) 100% tested
Applications
Water purification system
Water treatment system
Water saving system
Medical equipment
Building Automation
Smart agriculture automatic irrigation system,
Smart home system
Small equipment for automatic control
Recreational vehicle (RV), sprinkler truck, HVAC system
OP05 Five-Wires With SIgnal Feedback
- SW is switched to open, OLS is turned on after the valve is fully open, green wire outputs signal.Once the external controller receives the open position signal, it cuts off power, the valve stay in open position.
- SW is switched to closed, CLS is turned on after the valve is fully closed, yellow wire outputs signal.Once the external controller receives the close position signal, it cuts off power, the valve stay in closed position.
FAQ
- What are the differences between OP01F wiring and OP05 wiring?
For OP01F wiring, the actuator will cut off automatically and the valve stops moving after the valve is fully open/closed.
For OP05 wiring, the external control is needed to stop the valve moving after the valve is fully open/closed.
- What is the IP (Ingress Protection) rating of this valve?
IP67. For permanent outdoor installation, they should be installed under a cover or within a protective enclosure to avoid prolonged exposure to rain.
- Is this valve certified for potable water?
Yes. Flomarvel stainless steel ball valves are certified to NSF 61 and are approved for safe use with potable (drinking) water.
- Is OEM/ODM service available?
Yes. With extensive experience in OEM and ODM projects, we have the expertise to customize our products to meet your specific requirements.
- How many days is the lead time?
For standard products, when the order quantity is less than 50pcs, the lead time would be about 3 working days;
when the order quantity is 50-200 pcs, the lead time would be 7-10 working days, for 200-1000pcs order, it would be 15-20 working days.
Actually we don’t have requirement about the MOQ, because for most clients, they would need to test sample first, which could be 2 pcs.
- What is your warranty policy?
Our electric ball valve are guaranteed for 12 month after delivery. We guarantee to repair or provide spare parts or replace faulty product.
There are situations that are not covered though, for the details, please consult your sales executive.
