Description

The Flomarvel FH-MO/S series 2-way electric ball valve is made of UPVC, offering excellent corrosion resistance and suitable for use in a variety of environments.  This is a three-wire two-point control system, allowing independent valve opening and closing control through separate signal wires. The valve opens or closes when the corresponding control signal is activated. After the valve reaches the fully open or fully closed position, the actuator automatically cuts off power and keeps the valve in position.

As a manufacturer, to ensure reliability in demanding applications, our valves has enhanced sealing performance, precise full open / full close positioning, durable metal gear transmission, and 100% functional test before shipment (30-minute operation test).

With extensive experience in OEM and ODM projects, we have the expertise to customize our products to meet your specific needs and requirements.

Specifications

Working Voltage: DC5V/DC9-24V/AC220V

Operating Time: <5secs

Working Current: <100mA

Max Power: 5W

Working Pressure: 0-1.0MPa

Valve Material: Brass,Stainless Steel,UPVC

Manual Override: Optional

NPT BSP Thread for option

Sear Material: PTFE

Coil Connection: 35cm(13”) by default and it’s customizable

Enclosure: IP67

Average temperature: 0°C to 100°C

Ambient temperature: -20°C to 45°C

Fast Switching zero leakage metal gear (80,000+ cycles) 100% test

Applications

Water purification system

Water treatment system

Water saving system

Medical equipment

Building Automation

Smart agriculture automatic irrigation system,

Smart home system

Small equipment for automatic control

Recreational vehicle (RV), sprinkler truck, HVAC system

OP02 Three-Wires, Two Point Control

1. Turn on the open switch, the electric valve opens and stays in position after it is fully opened. The actuator cuts off power automatically with low power consumption.
2. Turn on the close switch, the electric valve closes and stays in position after it is fully closed. The actuator cuts off power automatically.

OP02F Three-Wires, Two Control With Signal Feedback

1. Turn on the open switch, the electric valve opens. After the valve is fully opened, the open position signal is output through the feedback wire. The external controller receives the signal and cuts off power, while the valve stays in the open position.
2. Turn on the close switch, the electric valve closes. After the valve is fully closed, the close position signal is output through the feedback wire. The external controller receives the signal and cuts off power, while the valve stays in the closed position.

FAQ

• What is the IP (Ingress Protection) rating of this valve?

         IP67. For permanent outdoor installation, they should be installed under a cover or within a protective enclosure to avoid prolonged exposure to rain.

• Is this valve certified for potable water?

         Yes. Flomarvel stainless steel ball valves are certified to NSF 61 and are approved for safe use with potable (drinking) water.